Citroën ID20 convertible 2021: The makeover part 2 – preparations

Picked up from Daniel Q yesterday with many thanks again, also for the tea!

2 air hoods and spacer, connector and front bumper mounting brackets. Partly NOS, partly used and in good condition.
Replacement outside handle for the left door
2 window cranks
2 Mudflaps original rubbers for the front fenders
2 stainless steel inserts to be mounted behind the inside door handles
Various DS small parts

The license plate holder I already had as spare.  The one I took off of the car is no longer usable.

New nicely polished convertible bumper, everything on the inside has been redone as well. The spider-bumper holders are nicely refurbished and preserved. Costs something and you have something right away!

Took out bad parts of the 2nd hand air horns so new sheet metal could be welded in.  The happers were blasted and then treated with zinc spray.

The spare license plate holder has been neatly flattened.

And primed
Just a quick fit

 

Ordered today 5-9-2021:

New suspension eye for L front screen

  • 8 x LED 120cm fixtures at ibood with 6400 Kelvin bulbs for the side van de garage
    and behind a few more existing emitters, light is everything when you are sanding and plastering!

  • The rail holders of the tilt front seats

    Left door panel, stripped. I will probably use these panels again. The plastic replicated panels seem to be too floppy anyway, and deform too easily.

Citroën DS/ID20 1970 convertible: The final makeover part 3 – execution